Genuine GE filter

GE XWFE Refrigerator Water Filter

Fits the 11 refrigerator models listed below, each checked against linked sources.

Checked 2026-10-28

Brand
GE
Part number
XWFE
Replace
about every 6 months

The XWFE has a built-in chip. The older XWF has no chip and is not a guaranteed substitute: fridges that expect an XWFE can show an error with an XWF. Buy the XWFE if GE lists it for your model.

Check genuine XWFE on AmazonBrowse non-genuine alternatives

As an Amazon Associate I earn from qualifying purchases. We verify the genuine filter only. Non-genuine results aren't checked by us: confirm the listing names your model and an NSF/ANSI certification.

Refrigerators that use the XWFE

Browse all GE refrigerator water filters by model.

How to replace the XWFE

  1. Find the filter: usually in the upper corner of the fresh-food compartment or inside the left door, depending on the model.
  2. Turn the old filter to the left until it stops (about half a turn) and pull it out. Keep a towel handy.
  3. Remove the cap from the new XWFE, insert it and turn it to the right until it stops. It raises itself into position. Do not overtighten.
  4. Run water from the dispenser for about 3 minutes (around 1.5 gallons) to clear air and prevent sputtering.
  5. XWFE filters have a chip, and on many models the filter status turns off by itself once the new filter is detected. If your panel has a Reset Water Filter pad, hold it for about 3 seconds.

More detail and troubleshooting: How to Replace a GE Refrigerator Water Filter.

XWFE questions

Which refrigerators use the XWFE?

We've confirmed 11 models: GE GSS25GYPFS, GE GNE25JYKFS, GE GNE27JYMFS, GE GFE26JYMFS, GE PVD28BYNFS, GE PGE29BYTFS, GE GSS25GSHSS, GE GSE25GSHSS, GE GSS25IYNFS, GE GSS25GMHES, GE GSS23GSKSS. Each model page links the parts listings we checked.

How often should you replace the XWFE?

About every 6 months. Replace it sooner if water flow from the dispenser slows noticeably.

Sources