Genuine Whirlpool filter
EveryDrop Filter 3 (EDR3RXD1)
Fits the 1 refrigerator model listed below, each checked against linked sources.
- Brand
- Whirlpool
- Part number
- EDR3RXD1
- Also sold as
- 4396841, 4396710, Kenmore 9083 (46-9083), Filter 3
- Replace
- every 6 months or 200 gallons, whichever comes first (source)
Kenmore owners: this is the genuine replacement for Kenmore 9083, 46-9083, 9020, 9020B, 9030, 9030B, 46-9030. See the Kenmore filter cross reference.
As an Amazon Associate I earn from qualifying purchases. We verify the genuine filter only. Non-genuine results aren't checked by us: confirm the listing names your model and an NSF/ANSI certification.
Refrigerators that use the EDR3RXD1
- ED5FVGXWS00Side-by-sideManufacturer
Browse all Whirlpool refrigerator water filters by model.
How to replace the EDR3RXD1
- Find the filter. Its location varies by model (inside the fresh-food compartment, in a door, or behind the bottom grille); your owner's manual shows where.
- Press the eject button or push the filter in to release it, then pull it straight out.
- Move the cap from the old filter to the new one if your model uses one, then push the new filter in until it clicks.
- Run water through the dispenser to flush out air and carbon dust, following the volume in your manual (often 2-4 gallons).
- Reset the filter indicator light (usually by holding the filter or reset button for about 3 seconds).
More detail and troubleshooting: How to Change the Water Filter in a Whirlpool Refrigerator.
EDR3RXD1 questions
Which refrigerators use the EDR3RXD1?
We've confirmed 1 model: Whirlpool ED5FVGXWS00. The model page links the parts listings we checked.
What other part numbers is the EDR3RXD1 sold as?
4396841; 4396710; Filter 3; Kenmore 9083, 46-9083, 9020, 9020B, 9030, 9030B, 46-9030. All refer to the same genuine filter.
How often should you replace the EDR3RXD1?
Every 6 months or 200 gallons, whichever comes first. Replace it sooner if water flow from the dispenser slows noticeably.