Genuine Whirlpool filter

EveryDrop Filter 6 (EDR6D1)

Fits the 2 refrigerator models listed below, each checked against linked sources.

Checked 2026-10-28

Brand
Whirlpool
Part number
EDR6D1
Also sold as
4396701, 4396702, 2301705, W10312235, Kenmore 9915 (46-9915), Filter 6
Replace
about every 6 months

Filter 6 is used in top-freezer refrigerators. Whirlpool lists it as the replacement for the WF-NL120V and WF-L200V filter systems.

Kenmore owners: this is the genuine replacement for Kenmore 9915, 46-9915. See the Kenmore filter cross reference.

Check genuine EDR6D1 on AmazonBrowse non-genuine alternatives

Save on your next change: Genuine 2-pack (EDR6V2P)

As an Amazon Associate I earn from qualifying purchases. We verify the genuine filter only. Non-genuine results aren't checked by us: confirm the listing names your model and an NSF/ANSI certification. Multi-pack links are Amazon searches for the manufacturer's own pack: check the brand and pack size on the listing.

Does your fridge also have an air filter?

Whirlpool sells Filter 6 in a kit with its FreshFlow air filter (EDR6VR6), and many refrigerators that take it also have an air filter. Not all do: check for a small vented air filter cover inside the fresh-food compartment before you buy one.

Find the W10311524 on Amazon

Source: everydrop Filter 6 + FreshFlow air filter kit, EDR6VR6 (Whirlpool), FreshFlow air filter cartridge W10311524 (KitchenAid). These are Amazon searches for the genuine part number. As an Amazon Associate I earn from qualifying purchases.

Refrigerators that use the EDR6D1

Browse all Whirlpool refrigerator water filters by model.

How to replace the EDR6D1

  1. Find the filter. Its location varies by model (inside the fresh-food compartment, in a door, or behind the bottom grille); your owner's manual shows where.
  2. Turn the old filter counterclockwise about a quarter turn and pull it straight out. Keep a towel handy for drips.
  3. Remove the protective cap from the new filter, line it up, push it in and turn it clockwise until it locks.
  4. Run water through the dispenser to flush out air and carbon dust, following the volume in your manual (often 2-4 gallons).
  5. Reset the filter indicator light (usually by holding the filter or reset button for about 3 seconds).

More detail and troubleshooting: How to Change the Water Filter in a Whirlpool Refrigerator.

EDR6D1 questions

Which refrigerators use the EDR6D1?

We've confirmed 2 models: Whirlpool GR2SHTXML, Whirlpool ET1FHTXMQ. Each model page links the parts listings we checked.

What other part numbers is the EDR6D1 sold as?

4396701; 4396702; 2301705; W10312235; Filter 6; Kenmore 9915, 46-9915. All refer to the same genuine filter.

How often should you replace the EDR6D1?

About every 6 months. Replace it sooner if water flow from the dispenser slows noticeably.

Sources