How to Reset the Water Filter Light on a KitchenAid Refrigerator

KitchenAid reset methods by control panel

• MAX COOL and MAX ICE buttons: touch both together for 3 seconds. The display counts down for 3 seconds, then flashes the icon and plays a tone.
• FILTER RESET button: press and hold it. The status light turns off when the system is reset.
• WATER FILTER button: press and hold it for 3 seconds. The water filter icon turns blue again and "Replace Filter" disappears from the display.
• OPTIONS menu: press OPTIONS, then FILTER RESET, then MEASURED FILL to confirm. The status light turns off.
• LIGHT and ICE TYPE buttons (models with an H2O light): press and hold both for 3 seconds. The status light turns off.

KitchenAid doesn't say which models use which method, so match the buttons on your panel, or check your owner's manual.

What the KitchenAid filter light (H2O light) means

• The water filter indicator (labelled H2O on some models) comes on when it's time for a new filter. On some models it changes from green to yellow or red before the change is due.
• KitchenAid recommends a new filter about every 6 months. On fridges without an indicator, change it at least every 6 to 9 months, or sooner if the water flow drops noticeably.

If the KitchenAid filter light won't reset

• Use a press and hold, not a tap: KitchenAid's methods hold the button or button pair for about 3 seconds.
• Make sure you're using the method for your panel. Holding the wrong button pair does nothing.
• Some models reset automatically once the new filter is installed, so the light may go off without a button press.
• If none of the methods work, your owner's manual has the exact sequence for your model, or contact KitchenAid.

The right filter for your KitchenAid fridge

Don't see your model? Search by model number or browse all KitchenAid models.

Frequently asked questions

Does the KitchenAid water filter light reset by itself?

Not on most models. KitchenAid says the status needs resetting every time you replace the filter, although some models reset automatically after a new filter is installed.

What does the H2O light mean on a KitchenAid refrigerator?

It's the water filter indicator. Replace the filter when it comes on, then press and hold LIGHT and ICE TYPE for 3 seconds to turn it off.

Do I have to change the filter before resetting the light?

KitchenAid's instructions are to reset the light after the new filter is in. The light is only a reminder: resetting it does nothing to the filter itself.

Related guides

• How to Change the Water Filter in a KitchenAid Refrigerator
• How to Reset the Water Filter Light on a Whirlpool Refrigerator
• How Often Should You Change Your Refrigerator Water Filter?