Genuine Hisense filter

Hisense HX2017F-A Refrigerator Water Filter

Fits the 1 refrigerator model listed below, each checked against linked sources.

Checked 2026-10-28

Brand
Hisense
Part number
HX2017F-A
Replace
every 6 months or 300 gallons, whichever comes first (source)

Hisense's spec sheet for the HRF266N6CSE1 lists the filter model as HX2017F-A. Some sellers list a similar number, HX2017FR-A, but we haven't found a Hisense source that says they are the same filter, so match the number printed on the filter in your fridge.

Find HX2017F-A on AmazonBrowse non-genuine alternatives

As an Amazon Associate I earn from qualifying purchases. We verify the genuine filter only. Non-genuine results aren't checked by us: confirm the listing names your model and an NSF/ANSI certification.

Refrigerators that use the HX2017F-A

Browse all Hisense refrigerator water filters by model.

How to replace the HX2017F-A

  1. Find the filter. Its location varies by model (inside the fresh-food compartment, in a door, or behind the bottom grille); your owner's manual shows where.
  2. Remove the old filter using the method printed on the filter, its packaging insert or your manual. Keep a towel handy.
  3. Install the new filter the same way until it is fully seated and locked.
  4. Run water through the dispenser for a few minutes to flush out air and carbon dust.
  5. Reset the filter indicator as described in your manual (on many models, hold the filter button for about 3 seconds).

More detail and troubleshooting: How to Replace a Refrigerator Water Filter.

HX2017F-A questions

Which refrigerators use the HX2017F-A?

We've confirmed 1 model: Hisense HRF266N6CSE1. The model page links the parts listings we checked.

How often should you replace the HX2017F-A?

Every 6 months or 300 gallons, whichever comes first. Replace it sooner if water flow from the dispenser slows noticeably.

Sources